|
Finishing Touches: Part of our Standard Operating Procedure is documentation that all critical appliances are plugged in when leaving the job site. This prevents accidents.
|
Finishing Touches: A visual system monitor, called a u-tube, monitors the vacuum inside the system and tells you that the system is working properly. The tops of the blue liquid should remain unequal. We mark the initial settings and a detailed instruction label in installed next to the u-tube.
The visual monitor can be located on the main suction pipe in the basement or in the garage.
The u-tube does NOT tell you the radon levels in the home.
|
Finishing Touches: For an additional charge we can leave a continuous radon monitor to perform radon diagnostic testing to determine if the system is working properly. This is an exclusive procedure only offered by Elliott and Associates and is offered at an additional charge. |
Finishing Touches: Sumps and check valves must be properly working and have no signs of leaking prior to our arrival. We can provide this service for an additional charge. |
